go get

Generic go-based data/metric-collector-framework for Gondul and more

by telenornms

v0.12.1 (see all)License:LGPL-2.1
go get

.. image:: :target:

.. image:: :target:

.. image:: :target:


Skogul - generic metric/data collector

Skogul is a generic tool for moving metric data around. It can serve as a collector of data, but is primarily designed to be a framework for building bridges between data collectors and storage engines.

This repository contains the Skogul library/package, and cmd/skogul, which parses a JSON-config to set up Skogul.

A copy of the auto-generated manual for skogul is also provided, which is aimed at end-users. See skogul.rst (or man ./skogul.1).

.. contents:: Table of contents :depth: 2 :local:

Quickstart - RPM

If you're on CentOS/RHEL 6 or newer, you should use our naively built RPM, available at

It will install skogul, set up a systemd service and install a simple configuration in /etc/skogul/default.json.

There's also a 64-bit linux build there, which should work for most non-RPM-based installations. But we make no attempt to really maintain it.

Quickstart - source

Building from source is not difficult. First you need Golang. Get it at (I think you want go 1.13 or newer).

Building skogul, including cloning::

$ git clone (...) $ make $ make install

You don't have to use make - there's very little magic involved for regular building, but it will ensure -version works, along with building the auto-generated documentation.

Running make install installs the binary and default configuration, but does NOT install any systemd unit or similar.

Also see make help for other make targets.


Skogul is written to solve a myriad of issues that typically arise when dealing with metric data and complex systems. It can be used for very simple setups, and expanded to large, multi-datacenter infrastructures with a mixture of new and old systems attached to it.

To accomplish this, you set up chains that define how data is received, how it is treated, where it goes and what happens if something goes wrong.

A Skogul chain is built from one or more independent receivers which receive data and pass it on to a sender. A sender can either transmit data to an external source (including an other Skogul instance), or add some internal routing logic before passing it on to one or more other senders.

.. image:: docs/imgs/basic.png

Unlike most APIs or collectors of metrics, Skogul does NOT have a preference when it comes to storage engine. It is explicitly designed to disconnect the task of how data is collected from how it is stored.

The rationale is that the problem of writing an efficient snmp collector should not be tightly coupled to where you store the data. And where you store the data should not be tightly coupled with how you receive it, or what you do with it.

This enables an organization to gradually shift from older to newer stacks, as Skogul can both receive data on old and new transport mechanisms, and store it both in new and old systems. That way, older collectors can continue working how they always how worked, but send data to Skogul. During testing/maturing, Skogul can store the data in both legacy system and replacement system. When the legacy system is removed, no change is needed on the side of the collector.

Extra care has been put into making it trivial to write senders and receivers. For example, an author of a new sender only has to add tags to their data structure to have that exposed as documentation.

See the package documentation over at godoc for development-related documentation:

End-user documentation is found in the manual page, which Skogul can generate on demand, or you can review a copy on github:

More discussion on architecture can be found in docs/.


Skogul is meant to scale well. Early tests on a laptop proved to work very well:

.. image:: docs/imgs/skogul-rates.png

The above graph is from a very simple test on a laptop (with a quad core i7), using the provided tester to write data to influxdb. It demonstrates that despite well-known weaknesses at the time (specially in the influx-writer), we're able to push roughly 600-800k values/s through Skogul. This has since been exceeded.

The laptop in question was using about 150-190% CPU for skogul and 400% for InfluxDB, the rest went to the testers. No real attempt at tuning was done, but a few different scenarios were tested.

Note that the general values/s is decent both with a ton of values for each metric, and just a handful of values per metric, but tons of metrics per containers.


As of September 2019, TLS was enabled and Skogul was tested again, just for TLS. Skogul was seen sending roughly 2 million key:values/s over HTTPS on the same laptop. The batch sender has also proven to be very valuable.


Skogul is a Valkyrie. After extensive research (5 minutes on Wikipedia with a cross-check on duckduckgo), this name was selected because it is reasonably unique and is also a Valkyrie, like Gondul, a sister-project.


There is little "exotic" about Skogul hacking, so the following sections are aimed mostly at people who are unfamiliar with Go.

A few sources for more documentation:

  • docs/
  • docs/CODING
  • doc.go

Testing .......

To run test cases, go test can be run. This can be used either in individual directories, or at the top directory, with go test -short ./... (note the triple dots. This is a go-ism for recursive behavior). Tests are run automatically if you create a pull request.

The -short argument disables integration tests that would otherwise fail unless you've set up a compatible postgres and mysql database locally.

To produce coverage analysis, use::

$ cd skogul $ go test -short ./... -covermode=count -coverprofile=coverage.out $ go tool cover -html coverage.out // Opens a browser with coverage anlysis

Tests are extracted from *_test.go files, and start with the name Test followed by a function or data structure, optionally followed by an underscore and an arbitrary name to support multiple tests of the same function/type. E.g. TestValidate(), TestHTTP_foobar() etc.

Formatting etc ..............

The "go report" at the top of this document is a decent test of marginal OK-ish-ness.

Tools you should use:

  • gofmt, to format code according to Go coding style. Use gofmt -d . see local diff, or gofmt -w . to fix it.
  • golint to lint your code. golint .

Installing these tools is left as an exercise to the reader.

Documentation .............

Documentation comes in two forms. One is aimed at end-users. This is provided mainly by adding proper labels to your data structures (see any sender or receiver implementation), and through hard-coded text found in cmd/skogul/main.go. In addition to this, stand-alone examples of setups are provided in the examples/ directory.

For development, documentation is written and maintained using code comments and runnable examples, following the godoc approach. Some architecture comments are kept in docs/, but by and large, documentation should be consumed from godoc.

See for the online version, or use go doc or similar, as you would any other go package.

Examples are part of the test suite and thus extracted from *_test.go where applicable.


We are doing frequent releases on github, with an ambition of reaching a 1.0 version within some reasonable time frame, I'm guessing 2020. It doesn't really mean much.

Short term work is defined in milestones on github.

Overall, the core modules and the scaffolding is getting pretty good. The new config engine is still receiving period updates, but the actual configuration hasn't changed much.

Future work to get us to 1.0 will be rounding out the new logrus-based logging by both rewriting the log receiver and overhauling each module to make our approach to logging consistent across all modules.

Similarly, test cases need to be refreshed. Tests are written very isolated, and a good bit of spaghetti-logic has arisen. We have decent coverage, but it's getting trickier to scale test case writing.

Other than that, there are modules to be written and features to be added which are mostly a matter of what needs arise.

GitHub Stars



4mos ago








6mos ago
6mos ago
6mos ago
6mos ago
No alternatives found
No tutorials found
Add a tutorial